初學者——弱弱的問個pipesim 結果輸出的問題

VeraZhang

用PIPESIM建了個模型，用的是paper上的實驗數據模擬段塞流，實驗大致如下
The working media of experiment is water and air.  Dry air (6 barg) and water are mixed and pump to a 65m long, 50.8mm diameter horizontal steel pipeline connected to a 35 m long ,50.8mm diameter Perspex pipeline which is inclined to -2.54 degree from horizontal , followed by a 15.5 m high ,45mm vertical PVC riser operating at atmospheric end pressure
D:\630data
network simulation能run
怎么輸出riser的 壓降和top riser 的液體出口流量？用nodal analysis嗎？nodal point 只能建在well 和設備上嗎 ？
哪位大師能幫幫忙，不勝感激！

frankqhw

好東西，分享給有用的人

xxoodong

感謝分享