|
此壓縮機在線計算程序可計算從入口壓力壓縮到出口指定壓力，在給定活塞直徑、連桿直徑、沖程長度和轉速的情況下，壓縮氣體混合物所需的壓縮機容量和功率。Estimates capacity and power required for compressing a gas mixture from an Inlet Pressure to Desired Outlet pressure for a given cylinder diameter, rod diameter, stroke length and RPM.
數據輸入Data
入口壓力Pressure In (P1)
Bar A
入口溫度Temperature In (T1)
° C
出口壓力Pressure Out (P2)
Bar A
多變效率Polytropic Efficiency (ηPoly)
%
壓縮機數據Compressor Data
汽缸直徑Cylinder Diameter (ID)
mm
連桿直徑Rod Diameter (OD)
mm
沖程長度Stroke Length (S)
mm
轉速Speed
RPM
機械效率Mechanical Efficiency (ηMech)
%
間隙Clearance (C)
%
損耗因子Loss Factor (L)
%
汽缸作用類別Cylinder Acting 計算結果Result 壓縮比Compression Ratio7.50 出口溫度Temperature Out109.17° C Z (平均值Average)0.9661 活塞排量Piston Displacement0.0179m/s 容積效率Volumetric Efficiency77.53% 實際流量Actual Flow0.0139m/s 氣體流量Gas Flow0.0139m/s 功率Power6.31kW 總功率與機械效率的比值Total Power / ηMech7.89kW 特性Properties
選擇要使用的模式Select
臨界壓力Critical Pressure (Pc)
Bar A
臨界溫度Critical Temperature (Tc)
° C
偏心因子Accentric Factor (ω)
摩爾質量Molecular Weight
Cp/Cv Ratio (k)
狀態方程Equation of State
組分Composition
輸入方式Input Basis
請先選擇下面左側的組分號，然后選擇右面的化學品名字，然后在下表中輸入摩爾或質量First select Component No., then select Chemical Name
|
|關于我們|網站地圖|油氣儲運網
( 魯ICP備11007657號-3 )
GMT+8, 2025-12-3 16:13 , Processed in 0.019688 second(s), 9 queries , Gzip On, MemCached On.
Powered by Discuz! X3.5
Copyright © 2001-2023, Tencent Cloud.
