|
這是一個用于計算立式氣液兩相分離器在線計算程序，基于Souders Brown公式，對有除霧器或沒有除霧器的立式氣液分離器，進行尺寸設計和計算，K值可通過GPSA方法、液滴尺寸方法和用戶輸入來獲得。This program does the design sizing and calculation for a vertical gas liquid separator with or without Mesh Pad based on Souders Brown Equation. K Values can be estimated based on GPSA method, Droplet Size and on user input.
數據輸入(Data Input)氣體(Vapor)
質量流量(Mass Flowrate)
Kg/h
密度(Density)
Kg/m
液體(Liquid)
質量流量(Mass Flowrate)
Kg/h
密度(Density)
Kg/m
時間(Time)
停留時間(Holdup Time)
min
緩沖時間(Surge Time)
min
K值(K Value) 選擇(Select)
壓力(Pressure)
Bar G
要求(Requirement)
K值(K-Value)
m/s
出口速度(Terminal Velocity):Vt
m/s
設計速度(Design Velocity)
% of Vt
管嘴(Nozzle Sizing)
進料ρV(Feed In, ρV)
Kg/m.s
出口氣體ρV(Vapor Out, ρV)
Kg/m.s
出口液體VMax(Liquid Out,VMax)
m/s
L/D比(L/D Ratio)
所需L/D(L/D Required)
解決方案Solution
單位Unit
基本配置 直徑Diameter 1100mm 長度Length 3300mm 除霧器直徑(Mesh Dia.)700mm H 低液位(H Low Level Liquid)150mm H 停留(H Holdup)1000mm H 緩沖(H Surge)600mm H 高液位到入口(H HLL to Inlet)600mm H 分離高度(H Diseng. Height)500mm H 除霧器(H Mist Elim.)150mm H 除霧器到頂部(H Mist Elim. to Top)300mm 管嘴配置 物料進口(Feed Inlet)200mm 氣體出口(Vapor Outlet)200mm 液體出口(Liquid Outlet)40mm 最小水平長度(Minimum Horizontal Length) 停留所需(For Holdup)596mm 緩沖所需(For Surge)596mm |
|關于我們|網站地圖|油氣儲運網
( 魯ICP備11007657號-3 )
GMT+8, 2025-12-3 16:11 , Processed in 0.019273 second(s), 9 queries , Gzip On, MemCached On.
Powered by Discuz! X3.5
Copyright © 2001-2023, Tencent Cloud.
